True RMS Voltage, Current and Leakage Logger
- Stores 60 000 data points
- 1Ø Power quality analysis
- LED flickers when the preset current/voltage value is exceeded
- Lowpass Filter will filter out the higher frequency harmonics
- Download data to PC via USB Interface cable
The K5020 is a 3 channel Leak and Load Current Logger for multiple parameters recording of voltage and or current. The clamp sensors and or voltage sensors can be connected to any of the 3 channels as the logger will automatically identify the sensors connected. The Power Quality analysis mode is for 1 Phase only: Reference Voltage, Swell, Dip and Short Power Interruptions. Variation of the measured voltage and current data can be confirmed simultaneously on the PC display monitor. Supplied with the user friendly software KEW LOG Soft 2, the recorded data can be transmitted to a PC directly by using the USB connection, whereby the data can then be edited for analysis and graphically displayed.
60000 data points 1Ch, 20000 per channel
IEC 61010-1 Cat III 300V
|Power source DC||
4 x LR6
|Power source AC||
External DC9V (specail AC Adapter)
USB , Kew Log Soft 2
|Measurements and Parameters||
Voltage, Current, Normal, Trigger, Capture, Power Quality Analysis.
PC software Kew Log Soft 2, USB Cable, Quick install manual, 4 x LR6 Batteries.
111 x 60 x 42mm
|Display update period||
Norm/Trig 1.65ms, Capture 0.55ms, POA approx 0.55ms
0-105% of each range
100mA-3000A depending on CT selection
2.5 or less:RMS (sine) 2% 1%f.s. 95% or less of each range
50/60Hz, 10% or more of the range Ch1