LED Voltage Tester
R1,403.00
Features :
- AC & DC Voltage detection from 12V to 690V
- LED Indication
- Double Injection IP64 housing
- Low Impedance test
- Built-in Flashlight
- Polarity Detection
- Voltage function operates without battery
Description
The MT472 is a 690V AC/DC Voltage Tester and is a basic voltage tester designed to meet electrician’s requirements for the measurement of AC and DC voltage and continuity. The tester displays the voltage on red LED’s which increment as the voltage increases. There is an LED indication for polarity when DCV is measured. No switching of the meter on as the tester automatically turns on when voltage is applied to the two test probes. The MT472 incorporates a Low Impedance Test, which induces a basic load of approximately 6kΩ at 690 volts. The MT472 meets the CAT IV 600V and CAT III 1000V safety standards.
Accessories:
- Instruction manual
- Test probe covers for CATIV 600V
Additional information
DC Voltage | 12-690V |
---|---|
DC Voltage accuracy | ±(30%) |
AC Voltage | 12-690V |
AC voltage accuracy | ±(30%) |
RCD Test | 10mA and 30mA |
Continuity | Yes |
Continutity resolution | greater than/equal to 400kΩ |
AC Bandwidth | 50Hz to 60Hz |
Digital Display | LED Indication |
Polarity Indication | Yes |
Low Input impedance | greater than/equal to 6kΩ |
Flash Light | Yes |
Enclosure | Double injection IP64 |
Power source | 2 x R03 (not supplied) |
Weight | 255g |
Dimensions | 150 x 70 x 48mm |