690V AC/DC Voltage Tester
R1,868.75
Features :
- CAT IV 600V and CAT III 1000V
- IP64 waterproof housing
- AC and DC Voltage 690V
- Rotary Field 690V AC
- RCD Test 30mA
- Continuity test to 200kΩ
- Phase Rotation
- LED display
- Single pole phase test set
- Low Impedance test
- Built-in Flashlight
- Polarity Detection
- Rotary Field indication
Description
The MT474 is IP64 and is a useful tester designed to meet electrician’s requirements for a multitude of applications. The tester displays the voltage on red LED’s which increment as the voltage increases. There is an LED indication for polarity when DCV is measured. No switching of the meter on as the tester automatically turns on when voltage is applied to the two test probes. The MT474 incorporates a Low Impedance Test, which induces a basic load of approximately 6kΩ at 690 volts. The voltage tester can show the direction of the rotating field with three-phase systems, with the direction of field shown as L = anticlockwise and R = clockwise. The tester can be used as a Single Pole phase tester and measure continuity up to 200kΩ. The MT474 meets the CAT IV 600V and CAT III 1000V safety standards
Accessories:
Test probe covers for CAT IV 600V
2 x AAA Batteries
Instruction Manual
Additional information
DC Voltage accuracy | ±(30%) |
---|---|
AC Voltage | 12 – 690V |
AC voltage accuracy | ±(30%) |
Rotary field | 100-690V |
Continuity | Yes |
Continutity resolution | greater than/equal to 400kΩ |
AC Bandwidth | 50Hz to 60Hz |
Digital Display | LED Indication |
Polarity Indication | Yes |
Over-range indication | Yes |
Low Input impedance | Greater than 200kΩ |
Flash Light | Yes |
Enclosure | Double injection IP64 |
Power source | 2 x R03 (not supplied) |
Weight | 255g |
Dimensions | 150 x 70 x 48mm |